Car restoration is one activity that will leave you with a high sense of accomplishment. It is an activity that demands dedication, time and money. Fords and Chevy’s are the two models that are the easiest to begin with as parts are more readily available.
Prior to any car restoration you will need to prepare your shop for the the task. Gather the materials needed such as a camera, a few cardboard boxes, a sharpie and some tags for labels. It is important to keep track of the parts that are taken off sooner rather than later. When it is time to take the car apart you need to estimate what needs to be replaced and what needs to be repaired. With this type of organization you will ensure you are not wasting parts at any time during the car restoration process.
Take inventory of the parts as you remove them by dividing them into two individual cartons labeled replace and repair. Remember to take pictures of them as you do this so you know what the car will look like, before and after. This process will also assist you in figuring how much money you will need and how long it will take you to finish the car restoration.
After you have the parts removed you can begin the cleaning process. The cleaning process of the car restoration requires the car be stripped down to bare metal. There are several ways to do this but you need to find the one you are most comfortable with. The easiest way is to have the car dipped in acid. This removes dust, rust, and other foreign materials.
You will be able to view the damage the car has been through once it is stripped. You may find rust holes, damaged floorboards, and dents. But do not despair! Even if the car didn’t look too bad when you purchased it you need to that this car has had a had a event-filled life. You only want to add to it right? So get busy and take that Sharpie to mark all the things that either need replacing or repairing.
It is time to repair all those dents, holes, and problem areas in order to get ready for sanding. You will use several grades of sandpaper throughout the sanding procedure beginning with 36 to 80. Once you have completed this step you are ready to apply the glazing. Begin with 220 wet grit sandpaper and proceed to 800 wet grit sandpaper. This will leave your car with a hazy mirror image and also provide a preventative measure against scratches.
Your car restoration is complete! You are now ready to show off your beautiful car to the neighborhood with pride.
For All The Essential Information On Classic Car Restoration, go to: classic car restoration
Tags: Automobiles